Table of Contents
Advertisement
Fig. 10
Fig. 11
Match the pointer in the lower part of the view finder field with the
required symbols (Fig. 10) by rotating the distance limb or set the required
distance on the distance scale.
7.AUTOMATIC MODE
Set the operation mode limb to the position «A» (Fig. 11).
Smoothly press on the release button, the camera automatic system will
ensure the setting of the required exposure and the pointer will read the
tentative value of a shutter speed and a diaphragm. The pointer is located in
the right-hand part of the field of vision of the view finder. When the
necessity arises to preliminarily (without exposing a frame) estimate the
exposure value, slightly press on the release button, the pointer will read the
combination of a shutter speed and a diaphragm. Important! In the event of
insufficient lighting the shutter will not operate and the pointer will be set
above the number series of diaphragms.
Advertisement
Table of Contents
