FED 50 Instructions For Use Manual
  1. Manuals
  2. Brands
  3. FED Manuals
  4. Digital Camera
  5. 50
  6. Instructions for use manual

FED 50 Instructions For Use Manual

Automatic miniature rangefinder 35mm camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FED 50
Automatic miniature Rangefinder 35mm camera
Instructions for use
Since efforts are continually made to improve the reliability and performance of
the product, minor changes may be Introduced without special notice.
1. GENERAL DIRECTIONS
The FED 50 is a modern miniature camera intended for amateur
shooting on standard black-and-white and colour perforated film 35 mm
wide. The camera operates in the automatic and manual control modes.
In the field of vision of the view finder the information is available on the
shutter speed and diaphragm processed in the automatic mode. For
accurate framing of a picture the lighted frame provided with the marks
for parallax correction is available. The camera is furnished with a self-
reset picture counter. The interlocking of a release button in the
automatic mode in the event of insufficient lighting as well as the
interlocking of the shutter cocking (which prevents the repeated or
incomplete cocking) are envisaged by the design of the camera.
The automatic system of the camera operates from a photocell which is
designed for long-term use. The replaceable power supply sources are
not required. Thoroughly familiarize yourself with the present
instructions before using the camera. The observance of all
recommendations set forth in the instructions will ensure the reliable
operation of the camera for many years.

Advertisement

Table of Contents
loading

Related Manuals for FED 50

Summary of Contents for FED 50

  • Page 1 Introduced without special notice. 1. GENERAL DIRECTIONS The FED 50 is a modern miniature camera intended for amateur shooting on standard black-and-white and colour perforated film 35 mm wide. The camera operates in the automatic and manual control modes.

  • Page 2: Specifications

    © Vneshlorgizitat, 1992 2. SPECIFICATIONS Picture size, mm....... 24 x36 Quantity of pictures...., 36 Photographic lens INDUSTAR-81: focal length, mm..... 3839x1 mm relative aperture..... 1:2.8 focusing range, m....from 1 to oo(infinity) Coupling dimensions, mm: for plain attachments....Ø48 for threaded attachments ....M46x0.75 Shutter ......
  • Page 3 Camera....................1 Shoulder strap ..................1 Magazine....................1 Lens protective cap.................1 Flash lamp clip stopper................1 Lens hood ....................1 Case.......................1 Shoulder strPacking box ............... 1 Instructions for Use................1 4. DESIGN...

  • Page 4: Preparation For Operation

    Fig. 1: Fig. 2 : 8 - film sensitivity setting disk; 9 - view finder 1 — release button; 2 — clip stopper; 3 — eyepiece; 10 - rear cover clip; 4 — rewinding knob; 5 - view finder aperture; 6 — operation mode Index; 7 — photocell embossing 11 —...
  • Page 5 Remove the camera from the case. Pull up the rewinding knob until the opening of a rear cover occurs. Load the camera with the magazine with the film and lower the rewinding knob (Fig. 5). Insert threading end of the film under the spring Fig.
  • Page 6 cover until the click is heard. convenience in use the shutter cocking lever has positions: a working position and a transport position. In the working position the lever end protrudes beyond the camera shield. To shift the lever from the working position to transport one, it is...

  • Page 7: Operating Procedure

    lens the release button will be interlocked (Fig.. 8). When using the film with the speed expressed in the units of COST, set the nearest value of theunit of GOST/ISO specified in theTable. Set the film sensitivity whose value is seen in the aperture (Fig.

  • Page 8: Automatic Mode

    Fig. 10 Fig. 11 Match the pointer in the lower part of the view finder field with the required symbols (Fig. 10) by rotating the distance limb or set the required distance on the distance scale. 7.AUTOMATIC MODE Set the operation mode limb to the position «A» (Fig. 11). Smoothly press on the release button, the camera automatic system will ensure the setting of the required exposure and the pointer will read the tentative value of a shutter speed and a diaphragm.

  • Page 9: Manual Control Mode

    8.MANUAL CONTROL MODE 9.SHOOTING WITH FLASH Set the diaphragm and operation LAMP mode indicator limb to any position, except the position «A». Remove the stopper from the clip of When the limb is set opposite the readings «2.8», «4», etc., the preset camera (ref.
  • Page 10 When the picture counter reads 36 pictures, press on the rewinding button, which releases the film Load and unload the camera in the transport mechanism (Fig. 13). premises or in the shadow, Unfold the handle on the rewinding avoiding the direct solar rays. knob, rewind the film into the Shift the cocking lever as far as it magazine (Fig.

  • Page 11: Storage Rules

    40 or 50 units by GOST/ISO instead of the film speed equal to 64 units by GOST/ISO. In the cases when a...
  • Page 12 APPENDIX RULES OF LOADING THE MAGAZINE WITH A FILM The camera is completed with the magazine type 135M intended for repeated application. Take the reel out of the magazine and insert the film end into the reel slot as shown in Fig. 15, a. Fold the free end of the film twice according to Fig.

Table of Contents