Edge Blending - NEC NP-PA500X Specifications

DESIGNED WITH THE ENVIRONMENT IN MIND
•
Extended lamp life with ECO Mode™ technology increases lamp life up to 4000 hours, while lowering power consumption
•
Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
•
Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
•
Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
•
Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with no cooling
required after shutdown) ensures efficient energy usage
•
Sleep timer can be set to automatically turn off the projector at set countdown times
•
Low power consumption (0.2W in stand-by mode) minimizes energy costs
•
Direct power off provides instantaneous shutdown of the projector
4000-hour filter life
NEC is committed to designing its products to provide long lifecycles. This commitment even extends
to components within its products, including the improved filter. This virtually maintenance-free filter
reduces the frequency at which cleaning is required, thereby decreasing your total cost of ownership.
Filter replacement is only required at the time the lamp is replaced.
BUILT-IN SOFTWARE
Built-in stacking correction
The industry's first built-in stacking correction capabilities (up to four projectors) allows
the projectors to boost an image's brightness up to 24,000 lumens, which is ideal
for larger-sized screens and environments with heavy ambient light. This feature also
prevents the complete loss of an image, which can happen when using only one projector.
Built-in wall color correction presets
These provide for adaptive color tone correction to display properly on non-white surfaces.
On a
green wall...
DICOM SIM
DICOM Simulation enables users in medical environments
to display accurate diagnostic images.
BEFORE
auto wall correction
AFTER
auto wall correction
PIP/Side-by-Side
This function allows two sources to
be displayed on the screen at one
time in either a picture-in-picture or
side-by-side configuration.

Edge blending

This function seamlessly blends
multiple projected images to display
a single high-resolution image.