Storage and transport
temperature
Lifting and carrying
Display and adjustment
module
External display and
adjustment unit
Flanges
Rod components
Centering
12
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 ... 85 %
With instrument weights of more than 18 kg (39.68 lbs) suitable and
approved equipment must be used for lifting and carrying.
3.4
Accessories
The instructions for the listed accessories can be found in the down-
load area on our homepage.
The display and adjustment module LG Local Display Interface is
used for measured value indication, adjustment and diagnosis.
The LG Remote Interface is an external display and adjustment unit
for sensors with single chamber housing and Ex d double chamber
housing.
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,
JIS B 2210-1984, GOST 12821-80.
If you are using an instrument with rod version, you can extend the
rod probe individually with rod extensions of different lengths or seg-
ment it for difficult installation situations.
All extensions used must not exceed a total length of 4 m (13.12 ft).
The extensions are available in the following lengths:
Rod ø 8 mm (0.315 in)
•
Basic segment: 450 mm (17.72 in)
•
Rod segments: 450 ... 480 mm (17.72 ... 18.9 in)
•
End segment: 26 ... 480 mm (1.02 ... 18.9 in)
If you mount the SITRANS LG240 in a bypass tube or standpipe, you
have to avoid contact to the bypass tube by using a spacer at the
probe end.
SITRANS LG240 - Operating Instructions
PBD-51041044