Gigabyte G593-SD0-AAX1 User Manual page 83

Parameter
Memory RAS Configuration
(continued)
(Note) Advanced items prompt when this item is defined.
Description
Leaky bucket time window based interface Hour
Š
– Leaky bucket time window based interface hour used for DDR
(0-24).
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket time window based interface Minute
Š
– Leaky bucket time window based interface minute used for DDR
(0-60).
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket low bit
Š
– Configures leaky bucket low bit (0x1 - 0x29).
– Press the <+> / <-> keys to increase or decrease the desired
values.
Leaky bucket high bit
Š
– Configures leaky bucket high bit (0x1 - 0x29).
– Press the <+> / <-> keys to increase or decrease the desired
values.
ADDDC Sparing
(Note)
Š
– Enable/Disable ADDDC Sparing.
– Options available: Disabled, Enabled. Default setting is
Disabled.
Enable ADDDC Error Injection
Š
– Options available: Disabled, Enabled. Default setting is
Enabled.
Patrol Scrub
Š
– Options available: Disabled, Enable at End of POST. Default
setting is Enable at End of POST.
Patrol Scrub Interval
Š
– Selects the number of hours (1-24) required to complete full
scrub. A value of zero means auto.
DDR5 ECS
Š
– Options available: Disabled, Enabled, Enable ECS with Result
Collection. Default setting is Enabled.
BIOS Setup
- 83 -