Related Manuals for OneTech NT10-400G-04
Summary of Contents for OneTech NT10-400G-04
- Page 1 NT10-400G РУССКИЙ v.2.0 MANUAL GRAVITY SPRAY GUN MANUAL INSTRUCTION NT10-400G-04 NT10-400G-06 NT10-400G-08 NT10-400G-10 NT10-400G-12...
- Page 2 NT10-400G ENGLISH v.2.0 ATTENTION! PLEASE READ THIS MANUAL BEFORE USING THE SPRAY GUN (TOOL). IMPROPER USE OF TOOL MAY CAUSE INJURY AND/OR PROPERTY DAMAGE! ONLY QUALIFIED AND SPECIALLY TRAINED PERSONNEL FAMILIED WITH THESE INSTRUCTIONS IS ALLOWED TO USE AND MAINTENANCE OF THE TOOL. This manual contains description, safety rules and all the information necessary for the correct use of the spray gun.
-
Page 3: Operating Principle
If there is any doubt regarding the suitability of a specific material, contact your ONETECH Distributor or ONETECH direct. OPERATING PRINCIPLE ✓... -
Page 4: Technical Specification
TECHNICAL SPECIFICATION Spray width, Nozzle size, Air Pressure, Air Consumption, Fluid Output, Weight, Model ml/min ± 20 mm NT10-400G-04 NT10-400G-06 NT10-400G-08 0.9 – 1.5 NT10-400G-10 NT10-400G-12 Material Inlet Thread Air Inlet Thread M8x1.0 (F) 1/4" (M) * – spraying distance – 150 mm, fluid viscosity – 11-15 seconds. -
Page 5: Troubleshooting Guide
NT10-400G ENGLISH v.2.0 TROUBLESHOOTING GUIDE FLUTTERING Possible Cause Solution Insufficient material in cap Refill material Dry or worn fluid needle packing set or loose fluid needle Lubricate or replace fluid needle packing set or tighten fluid packing screw needle packing screw Loose or damaged fluid nozzle Tighten or replace fluid nozzle CRESCENT... - Page 6 NT10-400G v.2.0...
- Page 7 NT10-400G v.2.0 Description Part No. Description Part No. Air cap 04 Fluid needle set (1.2) NT10S-281 NT10S-157 Air cap 06 O-ring NT10S-264 NT10S-158 Air cap 08 Gun body NT10S-265 NT10S-159 Air cap 10 Air connector NT10S-266 NT10S-160 Air cap 12 Air adjusting set NT10S-267 NT10S-161...
- Page 8 NT10-400G v.2.0...