Option Cycle - LG F2514NTGE Owner's Manual

Option Cycle

Time Delay (ตั ้ ง เวลาล่ ว งหน้ า )
You can set a time delay so that the washing machine
will start automatically and finish after a specified time
interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Time Delay button and set time required.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running time
may vary due to water temperature, wash load
and other factors.
Turbo Wash™
Wash cycle in under 1 hour with energy and water
saving. (based on half of laundry)
1
Press the Power button.
2
Select a washing programme.
3
Press the Turbo Wash™ button.
4
Press the Start/Pause button.
NOTE
• Turbo Wash™ function of Some courses is
selected automatically.
24
Add Load (เพิ ่ ม ผ้ า ขณะซั ก )
Use this function to add loads or remove the foreign
material.
1
Press the Add Load button.
2
Close the door after add loads or remove the
foreign material (e.g. coin or pin etc.)
3
Press the Start/Pause button.
• Results when choosing Add Load during cycles.
– When the tub is spinning : Tub stops and Door
Lock is off.
– When water temperature in the tub is higher
than 45 °C : Add Load is not available with short
warning sound for safety.
– When lots of water is in the tub : Door Lock is off
after draining by safe water level.
NOTE
• Open the door when Door Lock is off after
checking the safety.
• Add Load doesn't work when Tub Cleaning
course is in progress for safety.
• Put the laundry into the tub completely. Laundry
caught in between door closing part can damage
door packing (rubber part) and might cause failure.
Crease Care (ลดรอยยั บ )
If you want to prevent creasing, select Crease Care
option.
1
Press the Power button.
2
Select a washing programme.
3
Touch the Crease Care button.
4
Press the Start/Pause button.