Table of Contents
Advertisement
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Note: Stellen Sie sicher, dass Sie das
Gerät an einen Wasserzulauf mit
einer Sicherheitseinrichtung gegen
Trinkwasserverunreinigung durch
Rückfließen (gem. DIN EN 1717) an-
schließen. Die hierfür vorgesehenen
Anschlussventile/Wasserhähne sind
bei ordnungsgemäßer Hausinstalla-
tion mit dieser Sicherheitseinrichtung
ausgestattet.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.
¾˝
min.
10 mm
min.
17 mm
Installation and connection en
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a si-
phon
Drainage into a wash-
basin
Drainage into a plastic
pipe with rubber
sleeve or into a gully.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Fix and secure the wa-
ter outlet using an "el-
bow." → Page 27
Fix and secure the wa-
ter outlet using an "el-
bow." → Page 27
17
Advertisement
Table of Contents
