Table of Contents
Advertisement
en Troubleshooting
Errors
flashes.
flashes.
lights up.
flashes.
All other error codes.
Malfunctions
Errors
The appliance is not work-
ing.
The programme does not
start.
42
Cause
The tap is turned off.
The water inlet hose is
kinked or jammed.
The automatic voltage con-
trol system detects an unau-
thorised voltage under-us-
age.
Voltage under-usage causes
a programme extension.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start /
Reload .
Door is not closed.
Troubleshooting
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
No remedial action possible.
▶
Note: If the power supply is stable, the
programme continues to run as nor-
mal.
No remedial action possible.
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 31
Start the تفریغDrain programme.
▶
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Reload to start the
4.
programme.
Close the door.
1.
Press Start / Reload to start the
2.
programme.
Call the after-sales service.
▶
→ "Customer Service", Page 50
Troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press Start / Reload .
▶
Close the door.
1.
Advertisement
Table of Contents
