Sauder Soft Modern 415143 Manual page 20

Step 16 Step
å
Carefully turn your unit over onto its front edges. Unfold
the BACK (K) and lay it over your unit.
å
Make equal margins along all four edges of the
BACK (K). Push on opposite corners of your unit if
needed to make it "square".
å
Fasten the BACK (K) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up
over the SHELF (I) and SHORT UPRIGHTS (D).
Page 20
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
K
415143
These holes must line up
over the SHELF (I) and
SHORT UPRIGHTS (D).
1N
NAIL
(46 used in this step)
www.sauder.com/services