Table of Contents
Advertisement
Electrical Focus Adjustment
Adjust the focus electrically to obtain the best screen focus.
NOTE:
• The adjustment must be done to each input.
• Select the FOCUS test pattern using the TEST button on the full
function remote control.
Proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 61 for the explanation of the PASS CODE.
2 Use the CURSOR or
line. Press ENTER to display the FOCUS menu. You can also
select the FOCUS menu directly by pressing the INPUT "2"
button.
3 Use the CURSOR or
adjustment item. Press ENTER to display the selected adjustment
screen.
• You can also select the adjustment screen directly by pressing
the INPUT "1" through "4" button.
• For edge focus, you can select either "EDGE ALL" or "EDGE
SEPA." in the FOCUS EDGE mode of the OPTION menu.
(See page 65).
Items to select
• CENTER
......... The focus adjustment for the center of the
screen (each CRT).
• EDGE ALL
...... The focus adjustment for the edge area of the
screen (all CRTs).
• EDGE SEPA.
.. The focus adjustment for the edge area of the
screen (each CRT).
• CORNER. ....... The focus adjustment for the corner of the
screen (each CRT).
NOTE:
• The adjustment screen can also be displayed by pressing the
FOCUS button on the full function remote control. The FOCUS
button rotates the adjustment screen in the above order.
button to highlight the "2/FOCUS"
button to highlight your preferred
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– F O C U S –
1 / C E N T E R
2 / E D G E A L L
3 / E D G E S E P A .
4 / C O R N E R
39
ADJUSTMENT
Advertisement
Table of Contents
