Subscribe to Our Youtube Channel
Related Manuals for Afinia 3D H400+
Summary of Contents for Afinia 3D H400+
- Page 1 400+ Afinia 3D 8150 Mallory Court, PO BOX 846 Chanhassen, MN 55317 youtube.com/afinia3dprint Phone Support: 952-279-2643 Support: support@afinia.com Web: www.afinia.com Download full user manual at www.afinia.com/support...
- Page 2 Unpacking Install Printer Install Software Load Filament Network Setup Load and Print Model...
- Page 3 Unpacking After unboxing the machine, remove the cushions inside the printer. Open the front door and remove the top lids. Find the print head in the accessory box. WARNING: This 3D Printer - when used with styrene filament (ABS / HIPS / PC-ABS) - can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer.
-
Page 4: Install Printer
Install Printer Please go to www.afinia.com/support/downloads to download the Studio software and install it on your computer. Afinia 3D Studio Software Align the extruder mount to the extruder mount slots, then press down on the extruder until it locks into position. -
Page 5: Load Filament
Load Filament Push the guiding tube into the filament Insert filament and guiding tube into Put filament into the external Gently push the filament into the entrance and insert the tube into the holding the machine through the hole on the back spool holder and insert filament into the filament entrance and down until it stops. -
Page 6: Network Setup
Load and Print 3D Models Network Setup The H400+ can be connected to your network either via ethernet or Wi-Fi. Click the “Build” button at the main Connect the printer to the computer For ethernet connection, follow instructions 1, 2, 3. via USB, ethernet or Wi-Fi.
Need help?
Do you have a question about the H400+ and is the answer not in the manual?
Questions and answers