Table of Contents
Advertisement
Troubleshooting
Fault
Fault content
Bumper placed
1
incorrectly
Anti-drop
2
sensors error
Bad charging /
3
poor battery life
4
Low battery
Machine
5
trapped
6
Side brush error
7
Wheels error
Suction power
8
low
9
Encoder error
Fault tone
Bass
Treble
(beep)
(beep)
Check whether the bumper can
0
1
rebound normally.
Clean the anti-drop sensor or change
0
2
the location and start again.
Only use the original adapter to charge.
0
3
Try recharging the machine for 5 hours.
Put the machine back on the charging
1
1
station to charge.
1
2
Use the machine in an open place.
Check whether there is any foreign
2
1
matter entangled in the side brush
and clean thoroughly before starting.
Check whether there is any foreign
2
2
matter entangled in the wheel and
clean thoroughly before starting.
Check if the fan port is blocked or if
2
3
the dust box is full.
2
4
Try to restart the machine.
Fault handling method
Page 17
Advertisement
Table of Contents
