Subscribe to Our Youtube Channel
Related Manuals for Bluevua RO500X6
Summary of Contents for Bluevua RO500X6
- Page 1 BLUEVUA WEBSITE 1-888-637-0009 (24/7 Customer Service) https://www.bluevua.com support@bluevua.com https://twitter.com/Bluevua https://www.facebook.com/Bluevua https://www.instagram.com/bluevua/...
-
Page 2: Table Of Contents
2. Installation 2.1 Step 1: Install The Feed Water Tubing 2.2 Step 2: Install The Pure Water Tubing Thank you for choosing Bluevua! 2.3 Step 3: Install The Waste Water Tubing Every product sold allows us to bring more people to 2.4 Step 4: Install Water Leakage Protector... -
Page 3: Preparation
All contents in this chapter are only for the correct use of this product. during the shipping. If there is any part broken or cracked, please stop the installation and contact Bluevua Support Team instead. To ensure a smooth installation, please watch the installation video from our website: www.bluevua.com Prohibition Tel：1-888-637-0009 Mon-Fri 9:00 AM-5:00 PM CST... -
Page 4: Product & Accessories List
PREPARATION PREPARATION 1.5 Product & Accessories List 1.6 Product Overview The accessories are installed and connected as shown in the following (Figure 2). For a more efficient installation, please check and be familiar with the corresponding location (Figure 1), and remember to press the unlocking ring (Figure 12) to remove the trumpet-shaped cap from the port before the installation. -
Page 5: Installation
PREPARATION INSTALLATION 2.1 Step 1: Install The Feed Water Tubing 1. Close the cold water supply valve. Turn on the kitchen faucet to release the water pressure. Please make sure the kitchen faucet has remained open without any water Kitchen coming out, then proceed to the next step. -
Page 6: Step 2: Install The Pure Water Tubing
INSTALLATION INSTALLATION Note 2: For 4 and 5, If the cold water pipe is 3/8” instead of 1/2’’, please use the 1. Choose matching drill bits for the attached 3/8” converter (Figure 3). material of the counter: use diamond core for granite, and use a carbide drill bit for stainless steel. -
Page 7: Step 3: Install The Waste Water Tubing
When a leak occurs, the leakage protector will sound and pause the system. Please contact Bluevua Support Team for technical support. If the leakage protection is 4. Place the back plate on the other side of the drainpipe to combine to the front plate. -
Page 8: Osd Function
OSD FUNCTION MAINTENANCE 3.1 Operating Display 4.1 Filter Replacement Cycle Polypropylene Activated Carbon Filter 12 Months Indicator Operating Status Display Reverse Osmosis Membrane Filter 24 Months When power is on, the buzzer The indicator of the Carbon Filter 12 Months Power-On plays power-on sound, all button PCP/RO/CF filter is... -
Page 9: Automatic Flushing
MAINTENANCE 4.3 Automatic Flushing Q Why the system does not function? The system automatically enters flushing mode under the circumstances below: Power-saving mode: Reset the power or touch the button several 1. For The First Time Using times quickly to leave the mode. When the power is on, the system will automatically switch to auto-flushing mode and Power failure: Check if there is power outage. -
Page 10: Warranty
Q Why the machine makes loud noise during operation? The vibration generated by the pump: Move the machine away from Please scan the QR code above or visit website https://www.bluevua.com/warranty the side wall. Do not place the machine against the side wall or on the for 1 year manufacturer warranty registration.
Need help?
Do you have a question about the RO500X6 and is the answer not in the manual?
Questions and answers
I replaced the filter, reset the filter level display, flushed 4 times and now it will not stay on the display to run a cycle. It will only go to flush and when ran it only fills carafe 1/2 full. And repeat repeat reoeat. I can run a cycle to get clean water.