Advertisement
9322 - Smart Wi-Fi curtain controller
1- Safety warning
Warning: Failure to follow the safety guidelines provided below could lead to re, electric shock,
other types of injury, or damage to the Smart curtain controller or other property. Read all safety
information below before using the Smart Relay.
Avoid high humidity or extreme temperatures;
Avoid prolonged exposure to sunlight or intense UV light;
Do not drop or do not subject the unit to strong vibrations;
Do not disassemble or try to repair the unit;
The Smart curtain controller works at high voltage (230V) do not keep within reach of
children;
Disconnect the house power when installing this product;
Do not bring into contact with ammable liquids, gases and other explosive substances.
2 – Welcome
We present your smart Wi-Fi actuator.
This actuator is powered by the mains voltage and allows you to manage the motor of a rolling
shutter or awning in four different ways:
1. You can connect it to the Amazon Alexa and Google Home voice assistants;
2. It can be controlled from your smartphone via the Smart Life app;
3. It can be combined with one or more wireless buttons from the FEB Easy family, including
the double push button 9320/2;
4. It's possible to wire two traditional push buttons directly to the actuator;
5. You can control the motor by pressing the button on the actuator itself.
In this guide you will nd an overview of the product and instructions for installation and start-up.
Advertisement
Table of Contents
Related Manuals for FEB 9322
Summary of Contents for FEB 9322
- Page 1 1. You can connect it to the Amazon Alexa and Google Home voice assistants; 2. It can be controlled from your smartphone via the Smart Life app; 3. It can be combined with one or more wireless buttons from the FEB Easy family, including the double push button 9320/2;...
- Page 2 LED for one direction of the motor and the green for the other. When the product is started, the red LED ashes quickly, to indicate that the actuator is not yet connected to a Wi- Fi network. Antenna: it is the antenna used to receive radio signals from the FEB Easy wireless buttons.
- Page 3 Connection diagram for the 9322 To pair the 9322 actuator with a FEB Easy wireless button, simply press the pairing button for about 3 seconds, until the red LED indicator starts ashing, at this point press the button you want to pair.
- Page 4 commands or from the Google Home or Amazon Alexa apps. With the latter, to stop the shutter when it is moving, the voice command must start with "Alexa, pause (name given to the shutter)". Repeater mode: when you have a button connected to multiple actuators and the furthest actuator is out of range, you can set the closest actuator to act as a signal repeater, thus extending the operating range.
- Page 5 ◦ Check that your phone is connected to 2.4GHz Wi-Fi; ◦ Keep phone, router and 9322 module close to each other during connection. The device sometimes appears offline in the app: ◦ It could be due to the router: routers models allow simultaneous connection only of so many Wi-Fi devices.
Need help?
Do you have a question about the 9322 and is the answer not in the manual?
Questions and answers