NEC E421 User Manual page 7

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE
SURE POWER CORD IS UNPLUGGED FROM WALL
SOCKET. TO FULLY DISENGAGE THE POWER TO
THE UNIT, PLEASE DISCONNECT THE POWER CORD
FROM THE AC OUTLET. DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the
Therefore, it is dangerous to make any kind of contact with
any part inside this unit.
This symbol alerts the user that important literature
concerning the operation and maintenance of this unit has
been included. Therefore, it should be read carefully in order
to avoid any problems.
CAUTION: Please use the power cord provided with this display in
accordance with the table below. If a power cord is not supplied with this
equipment, please contact your supplier. For all other cases, please use a
power cord that matches the AC voltage of the power outlet and has been
approved by and complies with the safety standard of your particular country.
Plug Type North America
Plug Shape
Region
U.S.A./Canada
Voltage
120*
*When operating the E321/E421 monitor with its AC 125-240V power supply,
use a power supply cord that matches the power supply voltage of the AC
power outlet being used.
NOTE: This product can only be serviced in the country where it was
purchased.
CAUTION
European
U.K.
Continental
EU (except U.K.)
U.K.
230
230
English-3
Japanese
Chinese
China Japan
22 100