Busch-Jaeger 8217 U Manual

Introduction

Dangerous currents flow through the body when coming into direct or indirect contact with live components. This can result in electric shock, burns or even death. Work improperly carried out on current-carrying parts can cause fires.

• Disconnect the mains power supply prior to installation and/or disassembly!
• Permit work on the 230 V supply system to be performed only by specialist staff.
• Please read the mounting instructions carefully and keep them for future use.
• Additional user information and information about planning is available at www.BUSCH-JAEGER.de or by scanning the QR code.

Intended use

The device serves for replaying of radio stations or external audio sources. External audio sources are played, among others, via a Bluetooth^® function. It also has an alarm function and a sleep function.
The device must only be installed in dry indoor rooms.
The device may only be mounted in deep flush-mounted boxes according to DIN 49073-1.

Technical data

Connection

1. Option, simultaneous switch-on with room light.
2. Option, connection of an external antenna (e.g. a 70 cm cable antenna).
3. Variation: When connecting fluorescent lamps, energy-saving lamps or LED lamps, a 2-pole switch is necessary!

Operating buttons

Setup / operation

1. ON / OFF
2. Back one menu item / lower volume
3. Next menu item / higher volume
4. Change of station / OK / programming button

Icons

1. Turn-off time (sleep function) is set.
2. The alarm is activated
3. The short-time timer has been set.

Mounting

The device can sustain damage when coming into contact with hard objects! The plastic parts of the device are sensitive.

• Pull the control elements off only with your hands.
• Do not use screwdrivers or similar hard objects.

1. 
   The device is already mounted.
   • Pull off the control element!
2. 
   State of the device at the point of delivery.
   • Pull off the control element!
3. 
   Connect loudspeaker cables and signal lines to the flushmounted insert (plug-in terminals).
4. 
   
   Connect the mains cable to the flush-mounted insert (screw-type terminals).
5. 
   Mount the flush-mounted insert.
6. 
   Plug the control element onto the flush-mounted insert.

The setup is carried out automatically during initial commissioning or when resetting the settings (RESET).

Dismantling

Dismantling is carried out in the reverse order to mounting.

• To dismantle the loudspeaker cables and signal lines, loosen the plug-in terminals (e.g. with a screwdriver).

Operation

For the operation of this device we recommend the extended operating manual.

• To access the extended operating manual, use the QR code or the QR link, see the heading of these brief instructions.

Service

Busch-Jaeger Elektro GmbH - A member of the ABB Group, Freisenbergstraße 2, D-58513 Lüdenscheid, Germany, Tel: +49 2351 956-1600; www.BUSCH-JAEGER.de

Documents / Resources

References

• Busch-Jaeger - Elektro- und Installationstechnik

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Busch-Jaeger 8217 U Manual