JAKO JKBTNX4 Installation Manual

BLUETOOTH SMART DIGITAL DOOR LOCK
INSTALLATION GUIDE
JKBTNX4
Product performance:
Home door lock, suitable for the indoor door lock
Suitable to 38-50mm thickness door

1.- Determine the door direction

Stand outside of the door
adjust the direction of the handle
and latch bolt according to the
opening direction
when installing the door.

3.- Cutting template

1.- Please refer template carefully
to drill hole
2.- If tere is a deviation in the hole,
the lock body and panel assembly
are put into the door and the hole
is corrected until appropriate.
Remind
Left Open Right Open
Screw hole
Handle hole
Cylinder hole
Lock hole
Screw hole

2.- Change lock body direction

Latch bolt
Stopblock
Dead
bolt
When installing the lock body, the latch bolt is on the upper side,
the dead bolt is on the lower side, and the inclined surface
of the latch bolt is facing the opening direction
1.- Reserve the lock body and latch bolt is down
2.- Pusg the latch bolt lower than front plate, stopblock is down
and rotate 180 degrees
3.- Push the latch bolt into hole
4. Install lock body & Install strike box
www.jako.biz
Unescalable format
Plate
Mounting the lock body to
the door with two screws
requires that the lock body
be installed and kept parallel
to the door panel
Lock body
Strike box
Strike plate
Screw
Screw
Door panel