Transport, Storage, Decommissioning; Manufacturer Testing And Verification - Tiger BCF Instruction Manual

Maintenance of the beam clamp should include the following:
 Clean the beam clamp.
 Lubricate any moving parts.
 Correctly secure all fastenings.
The equipment should not be dismantled for cleaning or maintenance, except by an authorised competent
person.
4. Transport, Storage, Decommissioning and Disposal
Transporting the unit:
 Do not drop or throw the unit, always deposit it carefully.
 Use suitable transport means. These depend on the local conditions.
Storing or temporarily taking the unit out of service:
To ensure the continuing integrity of the unit you should store the unit in conditions that do not lead to damage or
deterioration. Therefore:
 Inspect beam clamps and accessories before placing into storage.
 Never return damaged beam clamps to storage.
 The unit should be secured against unauthorised and unwarranted use.
 Store the unit in a clean and dry place.
 Protect the unit including all accessories against contamination, humidity and damage by means of a suitable
cover.
 Protect against corrosion.
 Wipe off all dirt and water.
 A light oil film should be applied to the adjusting bar.
 If the unit is to be used again after it has been taken out of service, it must first be inspected again by a
competent person.
Disposal
After taking the unit out of service, recycle or dispose of the parts of the unit in accordance with the legal regulations.

5. Manufacturer Testing and Verification

This product was manufactured under our single-unit control of quality and was passed with strict inspection in
accordance with our inspection standards.
Capacity (tonne) WLL (kg)
1 1000
2 2000
3 3000
The operating temperature range is -50°C (-58°F) to +50°C (+122 °F).
Tiger Beam Clamps have a 4:1 factor of safety. They are tested in line with the requirements within applicable sections of
the European standard EN13155 :2003+A2:2009 and the Australian standard AS4991. All items comply with the essential
health and safety requirements of the Machinery Directive 2006/42/EC. Tiger beam clamps are third party verified by SGS
Certificate Number MDC 1302.
Unit 1, Greensfield Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Email: info@tigerlifting.com
Test Load (kg) Capacity (tonne)
1500
3000 10
4500 15
WLL (kg)
5 5000
10000
15000
www.tigerlifting.com
www.tigerlifting.com
Page 5 of 14
Manual BCF En 201706 v2.0
Test Load (kg)
7500
15000
22500