NEC AccuSync LCD5V User Manual page 12

Controls
OSD Function Description
Brightness
Contrast
Auto Contrast
Color Temperature
Horizontal Size
Fine
Left/Right
Up/Down
Auto-Adjust
Flesh Tone
Hue
Saturation
Language
Factory Preset
OSD Time Out
OSD Left/Right
OSD Up/Down
Information
ASLCDmanual022803.p65
–continued
To increase or decrease the brightness.
To increase or decrease the contrast.
Press "+" key to start auto contrast.
Press "-" or "+" to select 5000, 6500, 7500, 9300 and USER.
Only when selecting USER, you can make adjustments to the
R/G/B content.
To increase or decrease the size of image.
To increase or decrease the noise of the image.
To move the screen toward left or right.
To move the screen upward or downward.
Press "+" to turn on this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, Clock, and
Clock-Phase, the whole process takes about 5 seconds.
To adjust flesh tone of color.
To adjust hue of color.
To adjust saturation of color.
Select among English, French, Italian, German and Spanish.
To return the monitor to its default settings.
To adjust the period of OSD auto turn-off time.
To move the OSD position horizontally on the screen.
When the "+" key is pressed, the OSD control menu will move
to the right side of the screen. Likewise when the "–" key is
pressed, the OSD control menu will move to the left side.
To move the OSD position vertically on the screen.
When the "+" key is pressed, the OSD control menu will move
to the up side of the screen. Likewise when the
"–" key is pressed, the OSD control menu will move to the
lower side.
Indicates the current resolution and V-Frequency.
10
10
2/28/03, 9:44 AM