Error And Troubleshooting - Laddomat LM- A Series Installation And Operating Manual

6

ERROR AND TROUBLESHOOTING

Description of the error
Indicator light is off, pump is
not pumping any water.
Indicator light is flashing.
Indicator light changes colors.
Sounds and noises in the
systems.
Too low water flow rate.
If the pump is unresponsive, disconnect and connect it back to the electrical
grid.
This product falls within the scope of Directive 2012/19/EU regarding the management of
electrical and electronic equipment waste (WEEE).
Electronic-electrical equipment must not be disposed of with domestic waste as it is made of
various materials that can be recycled at the appropriate facilities. Inquiries should be made
through the municipal authorities regarding the location of the ecological platforms that
receive products for disposal and their subsequent correct recycling.
Furthermore, it is worth remembering that, upon purchase of an equivalent appliance, shops
are obliged to collect the product for disposal free of charge.
This product is not potentially dangerous for human health and the environment, since it
does not contain harmful substances as per Directive 2011/65/EU (RoHS), yet if abandoned
in the environment it has a negative impact on the ecosystem.
Read the instructions carefully before using the appliance for the first time. It is
recommended that you do not use this product for any purpose other than that for which it
was intended; there is danger of electric shock if used improperly.
The crossed-out bin symbol found on the appliance label indicates the compliance of this
product with the regulations regarding electrical and electronic equipment waste.
Abandoning the appliance in the environment or its illegal disposal is punishable by law.
Possible causes
No voltage applied.
The regulated performance
have been chosen.
Pump is blocked.
Pump or system is not
appropriately vented.
The selected setting is too low.
7
Fig.2
Proposed solutions
Check electric installation and
fuses.
Choose unregulated
performance
Clean pump.
Vent the system.
Select a higher performance.