HELLO, Thank you for purchasing the DC102-4K dashcam. Let’s get started! TABLE OF CONTENTS Declaration of conformity What's in the box Installing your dashcam Installing with PMPC01 (optional) Connecting to the app Setting the parking mode Playback recordings Frequently asked questions...
Type: DC102-4K Dashcam Declaration and applicable standards Hereby, TJM Supplies B.V. declares that the type of dashcam DC102-4K series conforms to: Directive EMC 2014/53/EU and the RoHS directive (2011/65/EU) and its amendment directives 2015/863/EU on the restriction of the use of certain hazardous substances in electronic equipment.
WHAT'S IN THE BOX Please check the box for each of the following items before installing your dashcam: Nordväl DC102-4K front and rear camera USB cable Cable clips + pry tool Micro SD card 12V power cable (cigarette lighter) 3M tapes...
Page 6
Windshield mounting 4K lens Full HD lens DC102-4K Buttons and functions Button Function Instructions Press the button for about 3 seconds to turn WiFi on or off. WiFi Enable/Disable WiFi Press and hold the button for about 10 seconds to format the SD card.
INSTALLING YOUR DASHCAM • Do not install the product in a location where it may obstruct the driver's field of vision. • Attach the camera to the windshield, behind the rear-view mirror. Caution Clean and dry the windshield before installation. Turn off...
Page 8
Plug the 12V power cable into the Remove the plastic film from the rear car's cigarette lighter and plug the camera. Remove the protective film cable into the dashcam. from the 3M tape. Attach the camera to the rear window Connect the front and rear camera in a place where the view is not with the AV cable.
INSTALLING WITH PMPC01 (OPTIONAL) • Read this manual carefully before installation and, if in doubt, consult an authorized installer. • Nordväl is not responsible for any damage caused by incorrect Caution connection or by not following the instructions in this manual. Stop the engine and remove the fuse box lid.
Page 10
Connect the yellow BATT(+) fuse to the fuse box. Find a spare constant fuse, or remove one from the fuse box. Then place the yellow BATT(+) fuse in the referred place. Connect the black GND wire to a ground point. Attach the GND wire to a grounding point, such as a bolt located directly on a metal part of the vehicle frame.
QR code provided on this page, or Android by searching for it in the app store. Open the WiFi settings on your smartphone and select the network: "DC102-4K". Use the default password 12345678 to connect. Once connected, open the app to see live video, change...
SETTING THE PARKING MODE • The parking mode option is only available after connecting the PMPC01 hardwire cable (page 7). Caution Open the app and go to “settings”. In the menu, choose “Parking Monitor” to set the parking mode. The dashcam will enter parking mode as soon as you stop the engine.
PLAYBACK RECORDINGS Download the GPS video player software from the following link: www.nordval.eu/downloads/dashcams/ Copy the download file to a computer and install it. Open the installed GPS video player software. Remove the micro SD card from the dashcam. Connect the micro SD card to the computer using an SD card adapter.
FREQUENTLY ASKED QUESTIONS The dashcam does not record or suddendly stops recording. Check the power supply and/or format the SD card in the camera or a computer. How do I format the SD card and reset the camera? While recording, the red LED flashes. Press and hold the WiFi button for 10 seconds to format the SD card.
Page 15
Is your question not answered? The FAQs and associated solutions and tips are covered above. Is your question not listed, or the possible solution did not help? Then go to www.nordval.eu/products-faq/ for more tips, or get in touch with us.
PRODUCT SPECIFICATIONS Product name Nordväl DC102-4K Front camera: black / 10 x 4,5 x 3cm / 123g Color / Size / Weight Rear camera: black / 5,7 x 3 x 3cm / 32g SD card Micro SD, class 10 or higher, up to 128GB...