Table of Contents
Advertisement
page 8
made only by qualified service personnel.
Stop using the device when it malfunctions. (See section
„Maintenance and repair").
Use only the AC adapter / battery charger designed for this
device. Using an improper AC power source may cause
fuming, electric shock or equipment damage and may result in
personal injury, death or fire.
Do not disassemble or modify the device, AC adapter or
battery. In particular, do not remove or bypass any electrical or
mechanical device (e.g. a fuse or safety switch) incorporated
into the design and manufacturing of this equipment. Modifica-
tion could cause damage that may result in personal injury,
death, electric shock or fire.
Never operate the device in an environment where flammable
liquids or vapors exist. Risk of dangerous fire or explosion
could result from the splicer's electrical arc in such an environ-
ment.
Do not use compressed gas or canned air to clean the device.
They may contain flammable materials that could ignite during
DRAFT VERSION
the electrical discharge.
Do not modify, abuse, heat or excessively pull on the supplied
AC cord. The use of a damaged cord may cause fuming,
electric shock or equipment damage and may result in
personal injury, death or fire.
Do not short-circuit the terminals of AC adapter and optional
battery. Excessive electrical current may cause personal injury
due to fumes, electric shock and equipment damage.
Do not touch the device, AC power cord and AC plugs with wet
hands.This may result in electric shock.
Do not operate the device near hot objects, in hot temperature
environments, in dusty/humid atmospheres or when
water-condensation is present on the device. This may result
in electric shock or malfunction
Do not store the device in any area where temperature and
humidity are extremely high. Possible equipment failure may
result.
Operating personnel is not allowed to remove instrument
covers. Component replacement and internal adjustments
must be made only by qualified service personnel.
Important safety information
.
Operating manual AOMM-FHM2 -
Version 11-2021A
Advertisement
Table of Contents
