Table of Contents
Advertisement
en Basic operation
Adjusting additional programme
settings
Press
to call up the sub-menu
1.
for the additional programme set-
tings.
Select the programme settings.
2.
The programme settings are not
saved permanently for the pro-
gramme.
Press
to call up the main
3.
menu.
13.4 Saving the programme
settings
Set the Memory programme.
1.
Press
to call up the sub-menu
2.
for the memory programmes.
Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if
5.
required.
a The programme is saved.
13.5 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
48
¡ To prevent creasing, take note of
the maximum load for the relevant
programme → Page 29.
Requirement: Prepare and sort the
laundry.
→ "Laundry", Page 43
Open the door.
1.
Ensure that the drum is empty.
2.
Separate the laundry and place it
3.
in the drum.
Note: Ensure that there is no laun-
4.
dry trapped in the door.
Close the door.
13.6 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent to the manual
dosing compartment.
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ The dosing recommendation is
aimed at the maximum load for the
programme.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
Advertisement
Table of Contents
