Picture Setting - JVC AV-29QS17B Instructions Manual

Picture setting

COLOUR SYSTEM
You can select the appropriate colour system when the picture is not clear
or no colour appears.
AUTO → PAL → SECAM → NTSC3.58 → NTSC4.43
You can also operate this function from the menu.
MENU SET UP menu COLOUR SYSTEM
For the colour system in each country or region, see the table below:
Area Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,
Indonesia, Malaysia, Singapore, Thailand, India, China, Vietnam,
Asia,
Hong Kong, etc.
Middle East
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Europe
Czech Republic, Poland, Germany, Holland, Belgium, UK, etc.
Oceania Australia, New Zealand, etc.
Republic of South Africa, Nigeria, etc.
Africa
Egypt, Morocco, etc.
WHITE BALANCE
You can change the white balance of the picture to better match the type
of video being viewed.
MENU PICTURE menu
NORMAL Normal white balance
COOL Bluish white
WARM
Reddish white
When DVD THEATER STATUS set to ON, WHITE BALANCE is not
available.
\ Page 8.
COMPRESS (16:9)
You can convert a normal picture (4:3 aspect ratio) into a wide picture
(16:9 aspect ratio).
MENU FEATURES menu
WHITE BALANCE
(Choose ON or OFF)
COMPRESS (16:9)
PICTURE MODE
You can choose the desired picture setting with one-touch.
USER
SHARP
VIVID
SOFT
CLEAR
System
You can also operate this function from the menu.
PAL
MENU PICTURE menu
To return the USER setting to default, press the blue button when the
SECAM
PICTURE SETTING menu is displayed.
NTSC
See details for the location menus in "Operating the menus"
SECAM
PAL
PICTURE SETTING
PAL
You can adjust the desired picture setting when selecting USER in
PAL
PICTURE MODE.
SECAM
1
MENU PICTURE menu
2
MENU PICTURE menu
CONTRAST 2 : Lower contrast
BRIGHT 2 : Darker
SHARP 2 : Softer
2 : Lighter
COLOUR
2 : Reddish
TINT
See details for the location menus in "Operating the menus"
BLUE BACK
You can set the TV to automatically change to a blue screen and mute the
sound if the signal is weak or absent, or when there is no input from an
antenna.
MENU FEATURES menu
This function is only available in RF mode.
You can change this picture setting (CONTRAST,
BRIGHT, SHARP, COLOUR, TINT) as you like.
(\ PICTURE SETTING)
To sharpen this picuture.
Heightens contrast and sharpness.
Softens contrast and sharpness.
To soften the picture.
PICTURE MODE
PICTURE MODE USER
PICTURE SETTING
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
(Choose ON or OFF)
BLUE BACK
\ Page 8.
\ Page 8.
9