Options - AEG F66742M0P User Manual

• The indicators
go off.
• The indicator
continues to flash.
• The display shows the current
setting:
notification is activated (factory
setting).
3. Press Start to change the setting.
= the rinse aid empty notification is
deactivated.
4. Press the on/off button to confirm
the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
, and
= the rinse aid empty
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
Option until the indicators
,
flash and the display is blank.
2. Press Option.
• The indicators
and go off.
• The indicator
• The display shows the current
setting: = AirDry activated.
3. Press Option to change the setting:
= AirDry deactivated.
4. Press the on/off button to confirm
the setting.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With use
ENGLISH 11
,
and start to
,
continues to flash.