Specifications
Setup - Before use:
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
Make sure that the trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Page 10
Electrical Rating
No Load Speed
Arbor Hole Diameter
Cut-Off Wheel Diameter
Min – M ax Wheel
Thickness
For technical questions, please call 1-888-866-5797.
120VAC / 60Hz / 6A
n
: 20,000/min
0
3/8"
3" (Ø75mm)
0.030" – 0 .125"
Item 59248