Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2022 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22e
Advertisement
Summary of Contents for Bauer 22569E-B
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
table of contents Safety ............2 Operation ........... 12 Specifications ..........10 Maintenance ..........14 Setup ............10 Warranty ............ 16 WarninG SyMBOLS anD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
Electrical Safety 1. power tool plugs must match the outlet. 4. Do not abuse the cord. never use the cord never modify the plug in any way. for carrying, pulling or unplugging the power Do not use any adapter plugs with grounded tool. - Page 4 power tool use and care 1. Do not force the power tool. 5. Maintain power tools. check for misalignment use the correct power tool for your application. or binding of moving parts, breakage of parts and any other condition that may affect the The correct power tool will do the job better and power tool’s operation.
- Page 5 10. Wear personal protective equipment. Depending 13. never lay the power tool down until the on application, use face shield, safety goggles accessory has come to a complete stop. or safety glasses. as appropriate, wear dust The spinning wheel may grab the surface mask, hearing protectors, gloves and shop and pull the power tool out of your control.
- Page 6 Kickback and related Warnings Kickback is a sudden reaction to a pinched or 5. Do not attach a saw chain, woodcarving blade, snagged rotating wheel. Pinching or snagging segmented diamond wheel with a peripheral gap causes rapid stalling of the rotating wheel greater than 10 ...
- Page 7 Vibration Safety This tool vibrates during use. Repeated or 2. Do not smoke during use. Nicotine reduces long-term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury, increasing the risk of vibration-related injury. particularly to the hands, arms and shoulders.
- Page 8 Grounding tO prEVEnt ELEctric SHOcK anD DEatH FrOM incOrrEct GrOunDinG WirE cOnnEctiOn: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug.
- Page 9 Extension cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.
-
Page 10: Specifications
Specifications Electrical Rating 120VAC / 60Hz / 6A No Load Speed : 20,000/min Arbor Hole Diameter 3/8″ Cut-Off Wheel Diameter 3″ (Ø75mm) Min – M ax Wheel 0.030" – 0 .125" Thickness Setup - Before use: read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. - Page 11 Functions Wheel Guard trigger trigger Lock Off Wheel Guard Screws cut-Off Wheel (sold separately) Item 59248 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Operating instructions read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
-
Page 13: Operation
adjusting the Wheel Guard tO prEVEnt SEriOuS inJury: Do not operate this tool without the Wheel Guard properly installed. 1. Loosen the Wheel Guard Screws. 4. Tighten the Wheel Guard Screws securely. 2. Slide the collar of the Wheel Guard 5. -
Page 14: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn: Make sure that the power Switch/trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section. tO prEVEnt SEriOuS inJury FrOM tOOL FaiLurE: Do not use damaged equipment. - Page 15 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
-
Page 16: Warranty
record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Replacement parts not available. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.