Page 3
He pushed technological boundaries to the limit to create the kind of subwoofer he could live with. Earthquake quickly created a name for itself in the car audio industry and became well known for its powerful subwoofers and amplifiers.
Page 4
INTRODUCTION The DJ-Array GEN2 line array speaker system consists of two 4x4-inch array speakers that were designed for DJ and pro sound applications. The complete DJ-Array GEN2 System consists of the following packaged items: In The Box Two (2) sets of 4 x 4” Array Speakers Two (2) 16.5 feet (5m) 1/4”...
Page 5
Where will the source equipment be located? tions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses that produce heat. Specifications are subject to change without notice. DJ-Array GEN2 Manual...
Page 6
ASSEMBLING DJ-ARRAY GEN2 SPEAKERS Before you begin assembling the DJ-Array GEN2 speaker system, make sure that you have all of the required mounting hardware. Each array requires 12 bolts and four nuts for assembly. With the included mounting hardware, fasten the...
Page 7
The DJ-Array GEN2 line array speaker system is now ready to mount onto a stand. Earthquake Sound supplies speaker stands (sold separately) that can match with the DJ-Array GEN2. The 2B- ST35M steel speaker stand is recommended for this array speaker.
Page 8
DJ-Quake Sub v2 HUM Kleaner Using the supplied 1/4″ TRS cables, connect left and right DJ-Array GEN2 speaker systems to the left and right array inputs located on the back of the DJ-Quake Sub v2 or any other amplifier that Earthquake strongly recommends using the HUM supports 1/4″...
Page 9
98dB (1w/1m) High Pass Filter 12dB/oct @ 120Hz–20kHz Array Components 4″ Midrange 1″ Compression Driver Input Connectors 1/4″ TRS Net Weight (1 Array) 20 lbs (18.2 kgs) 19.25ʺ (489mm) 5.75ʺ (146mm) Specifications are subject to change without notice. DJ-Array GEN2 Manual...
Page 10
(as shown on the original sales receipt with serial number affixed/written on it). The one (1) year warranty period is valid only if an authorized Earthquake dealer properly installs the product and the warranty registration card is properly filled out and sent to Earthquake Sound Corporation.
Page 11
Model Name/Number: ____________________________________________________________ Serial Number: _________________________________________________________ Date of Purchase: Authorized Dealer/Installer Info: ______________________________________________________________________ Name: ____________________________________________________________________ Address: ____________________________________________________________________ ______________________________________________________________________ Phone: Notes _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ Specifications are subject to change without notice. DJ-Array GEN2 Manual...
Page 12
Earthquake Sound Corporation 2727 McCone Avenue. Hayward CA, 94545. USA US Toll Free: 800-576-7944 | Phone: 510-732-1000 | Fax: 510-732-1095 www.earthquakesound.com...