Advertisement
(ii) Remove the air filter from the air filter case.
Air filter
(on lamp unit 2)
(ii)
Air filter case
6) Attaching the air filter.
(i) Attach the new air filter to the air filter case.
• Align the the air filter with the grooves of
the air filter case and firmly insert.
(ii) Attach the air filter case to the projector.
• Insert firmly until it clicks into place.
Air filter
7) Attach the lamp unit cover.
z Close the lamp unit cover by the reverse
procedure from step 2), and use a Phillips
screwdriver to tighten the lamp unit cover
fixing screw (one screw).
z Make sure the connector at the side of the
lamp unit cover is firmly inserted in the fan
power connector.
z Make sure to attach the lamp unit cover
properly.
Note
z When you place the new lamp unit, the projector
resets the total usage time of the lamp unit
automatically.
Attention
z After unpacking the lamp unit, discard the
packaging material properly.
Air filter
(on lamp unit 1)
Air filter case
ENGLISH-5
Advertisement
