Advertisement
Read this first!
WARNING:
Before replacing the lamp unit and air filter, be sure to turn the power off and to disconnect the power
plug from the power outlet.
z Electric shocks or lamp breakage can result if this is not done.
Do not disassemble the lamp unit.
z If the lamp breaks, it could cause injury.
When replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour
before handling it.
z The cover reaches a very high temperature, so failure to observe this will cause burns.
CAUTION:
Do not touch the fan with your fingers or any other parts of your body when replacing the lamp unit
and air filter.
z Doing so can cause injury.
NOTICE
For USA only
Hg-LAMP CONTAINS MERCURY, Manage in Accord with Disposal Laws.
See: www.lamprecycle.org or 1-888-411-1996
Accessories
Check that the following accessories are included.
Air filter
z 1 air filter is included with the ET-LAD120 and 2 air filters are included with the ET-LAD120W.
Replacing the lamp unit and air filter
z Be sure to turn off the power before replacing the lamp unit and air filter.
z When switching off the projector, make sure to follow the procedures in "Switching off the projector" (
2-ENGLISH
Always follow these precautions
page 3).
Advertisement
