Cosmic Byte CosmoBuds X100 User Manual page 6

PAIRING THE X100 TO
YOUR BLUETOOTH DEVICE
A) FIRST TIME USER- SMART POWER ON
a. Once you remove the earbuds from the charging case, they will automatically enter
pairing mode.
b. Visit your mobile Bluetooth settings, New Device and connect to "CosmoBuds X100"
c. The CosmoBuds X100 will automatically pair with your mobile and is ready for use.
B) MANUAL PAIRING- MANUAL POWER ON
a. Long press the touch buttons on both the earbuds simultaneously until the LED lights
on the earbuds start to ash.
b. The earbuds will connect to each other and enter pairing mode.
c. Visit your mobile Bluetooth settings, New Device and connect to "CosmoBuds X100"
d. The CosmoBuds X100 will automatically pair with your mobile and is ready for use.
INSTANT ON AND PAIR (IOP™)
The CosmoBuds X100 feature instant on and pairing feature. Once you have connected the
Earbuds to your device it will automatically connect to your mobile device as soon as you
remove it from the case.
NOTE:
Pairing mode lasts for 5 minutes. If the pairing time is missed, then you will need to reconnect
the earbuds and follow the above-mentioned procedure.
X100 remembers previously connected devices; once switched on, the earbuds automatically
reconnect to the previously connected device.