Advertisement
This monitor can be mounted on the dash and can be mounted
on both horizontal and vertical surfaces. Make sure the view is
suitable to the driver to observe the images. Take care not to
block any necessary viewing area when mounting. Before
mounting the system, permanently hook up all connections to
ensure proper operation.
1.
After determining the monitor location, position the
monitor support bracket, mark the bolt hole location, and then
drill the holes. Be careful not to drill into any other surface that
may be hidden.
Attach monitor bracket. Mount the monitor to the
2.
support bracket with supplied hardware. When mounting the
monitor bracket be careful to check the area where you will
be setting the screws. Be sure you will not drill into items
such as other cables, dash air bags, etc. and the surface will
support the item being attached.
Waterproof Aviation
Connectors
SYSTEM MOUNTING
Mounting Monitor
Camera Connection
Secondary Waterproof Sleeve
Slides Over Aviation Connection
Thru-wall Gasket To Seal
Thru Vehicle Exterior
Advertisement
