Removable Water Tank - MALTEC DH-900 Instruction Manual

CONNECTION
1. After removing the packaging materials, there should be 2 items:
a) mini dehumidifier
b) AC/DC Power adapter
2. Plug the DC power jack of AC/DC power adapter to the DC power socket, then
connect the AC plug of the AC/DC power adapter to the appropriate main socket.
3. Press the „On/Off" button to „On" position, the mini dehumidifier will begin to
operate. The green LED will be turned on. Listen and feel for the air blowing from
dry air outlet.
4. To switch off the unit, press „On/Off" button to „Off" position, the mini dehumidifier
will be turned off.

REMOVABLE WATER TANK

When the water tank is full, with approximately 500ml of water collected, the unit will be
switched of automatically and the „Yellow" LED will be on.
To remove the water tank, first switch off the mini dehumidifier, press „On/Off" button to the
„Off" position. Then remove the water tank from the unit and pour out to the toilet or
bathroom. Put the water tank back into the unit. To continue dehumidifying, press the
„On/Off" button to „On" position again.
CLEANING
Before cleaning the unit, turn off the mini dehumidifier and unplug the AC plug from the
main socket first. Use a piece of soft cloth to clean the surface of the product or use a
brush to wipe the dust off the grills of the air inlet.
CAUTIONS
1. After having finished using the mini dehumidifier, the user should switch the unit off
by pressing the „On/Off" button to „Off" position.
7/12