Hallis Hudson Rolls Super glide Instructions

Hallis Hudson Group Ltd, Unit B1, Red Scar Business Park, Preston, Lancashire PR2 5NJ
Sales Tel: 01772 202 202 | Sales Fax: 01772 515 515
Email: sales@hallishudson.com | www.hallishudson.com
superglide_instructions_proof_v5.indd 1-2
If your track is longer than 2.75 metres, we have supplied it in two equal lengths, each
with its own independent cord pull. These two lengths can be easily and securely joined
with the centre pulley and joining piece supplied.
It is a good idea to join them on the floor and have someone to help you lift them into
place to avoid straining the joining piece.
Screw the cord compensator to the wall or window sill directly below the end pulley on the track.
The cords must not be twisted. The pulley wheel housing can be turned by fully extending the compensator body and rotating
as required. If you need to adjust the cord tension, refer to paragraph 3.
WARNING!
WARNING!
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that
operate the product.
To avoid strangulation and entanglement, keep cords out of the reach of young children.
Young children can be strangled by loops in pull cords, chains, tapes and inner cords that operate the product.
Cords may become wrapped around a child's neck. Move beds, cots and furniture away from
To avoid strangulation and entanglement, keep cords out of the reach of young children. window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop.
Cords may become wrapped around a child's neck. Move beds, cots and furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist and create a loop.
SPECIFIC WARNING FOR NON-INTEGRAL DEVICES
See safety device - Fitting instructions
Children can strangle if this safety device is not installed. Always use this device to keep cords
or chains out of reach of children.
21/03/2014 12:01