Aircatglobal Virtualfly SWITCHO RADIOS User Manual page 5

4. START UP
4.1 ACTIVATING PROCEDURES
1. Start your preferred flight simulation software (MSFS,
Prepar3D or X-Plane 11/12).
2. After the RADIOS is connected to the PC, VFHub is running
and showing a "Connected" status for the RADIOS, press the
push button (a) indicated below to start the RADIOS.
It is very important to activate/deactivate the
device using the ON/OFF button and to wait for
the software to load before deactivating the device.
SWITCHO RADIOS | User's manual
4.2 DEACTIVATING PROCEDURES
Press the push button of the SWITCHO RADIOS and wait until
everything has stopped before unplugging the SWITCHO
RADIOS from the power source.
ON/OFF
ON/OFF
5