Advertisement
Assembly
Assembling the Spider
Step 1. Attach the 3 Base Parts of Spider Web ( C) together by aligning the connecting rods and
holes. (FIG.1)
Step 2. Place the Body of Spider (A) in the middle of the Web and fasten to Web with the Bolt
and Wingnuts (D). (FIG.1)
FIG.2
Step 3. Insert the rod at the end of each Pair of Leg (B) into the matching hole in the Body of
Spider (A) and secure together with Cotter Pin (E). (FIG.2)
Step 4. Insert Ground Stakes (F) at the base of the Web to secure to the ground. (FIG.3)
Pre-Operation
CAUTION:
Do not unplug by pulling on cord.
CAUTION:
(0.08 Amps) for Spider. Do not overload. Do not connect to another lighting string,
decorative outfit or other electrical product. Before you use or re-use this product
inspect it carefully. Return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
Care and Cleaning
FIG.1
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.3
Grasp the plug to insert or remove from the power source.
The lighting string on this product is rated at 9.6 Watts
Advertisement
