Method Of Operation - Daping DP16-Pro User Manual

Method of operation

How to turn the power on / starting recording:
First turn on the power/record button, then start recording after
the recording light flashes red. (Note: This product will automatically
create one recording file every 60 minutes. Please note that
when the SD card is full, the record and play lights will flash 10
times at the same time and you can no longer record. (You can
extend this setting from 60 minutes to 120 minutes by contacting
us to change the software. Please see "Common Problems"
at the end of the manual.))
Stop recording: Press the Mode / Play button during recording
to stop recording. (Recording light lights up in red) Press the
Mode / Play button again to start recording again. (The recording
light flash red) (Note: To save battery after you stop recording,
you must resume recording within 20 minutes or the power will
turn off automatically. (By contacting us to change the software,
you can change the stop time from 20 minutes to 60 minutes and/or
change to auto power-off function after recording stops. If necessary,
please refer to "Common Problems" at the end of the manual. "
Please refer to the.))
Turn off the power: Switch off the power/record button to
power off the device.
Save record: If you turn off the power/record button during
recording, the recording will be saved and the power will be
turned off. (Note: If you plug in an earphone while recording,
the recording will be automatically saved and playback will start.)
3