Advertisement
40-1416.fm Page 3 Wednesday, August 11, 1999 8:01 AM
Connecting Two PA-110s
to a Monaural Amplifier
You can connect a second PA-110 to
cover a wider listening area. The PA-110
puts an 8-ohm load on the amplifier. If
you connect a second PA-110 in series,
the load increases to 16 ohms. If you con-
nect a second PA-110 in parallel, the load
decreases to 4 ohms. Check your ampli-
fier's specifications to see which connec-
tion to use.
Connecting Two PA-110s to
a Stereo Amplifier
You can connect two PA-110s to a stereo
amplifier for stereo sound. Connect one
PA-110's positive (+) and negative (–)
terminals to the amplifier's corresponding
positive and negative left speaker termi-
nals.
Connect the other PA-110's terminals to
the amplifier's corresponding right speak-
er terminals.
CARE AND
MAINTENANCE
Your Radio Shack PA-110 10-Inch 2-Way
Public Address Speaker is an example of
superior design and craftsmanship. These
suggestions will help you care for the
speaker so you can enjoy it for years.
• Keep the PA-110 dry. If it gets wet,
wipe it dry immediately.
• Keep the PA-110 away from dust and
dirt.
Caution: Do not clean the grille or speak-
er elements with a vacuum cleaner. Doing
so might cause permanent damage. Use
a feather duster or soft cloth instead.
3
Advertisement
