Advertisement
Instructions
for Installer,
Maintenance Engineer
and final User
7 MAINTENANCE
The following section is a basic guide for general maintenance and cleaning of the vendor.
7.1 Access to Maintenance Area
Access to the internal part of the vendor (maintenance area) is possible using the pecially provideds key
supplied with the Vending machine.
7.2 Preventive Maintenance
In order to guarantee a good performance of the Vendor the following maintenance operations are
recommended:
•
Check the vending machine and its surroundings area, check for signs of rust on the cabinet and
obstructions of air vents
•
Open the door and check the absence of water accumulation, signs of rust, and moisture around
the edges of the door
•
Check the evaporator drain for obstructions (water in the evaporator area must drain towards the
condenser pan)
•
Periodically check the door seals. If damaged replace immediately
•
Periodically check that the condenser is clean
•
Check that the evaportor fans and the cooling unit run normally (the blades must be free from any
obstruction)
•
Check that the compressor and the condenser fans run normally ( the blades must be free from
any obstruction)
•
Check that all the selections are correctly delivered.
SINFONIA
H4345 - 00
FIG. 6.1 – ACCESS KEY
02/2013
Rev. 00
Page 27 of 41
Advertisement
