Advertisement
Main unit
1 Standby/on switch (Í/I) (
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Disc tray (
24)
3 Blue LED
≥It is possible to set the LED to turn on/off. (
4 Recording indicator
≥The indicator will light up while recording.
≥The indicator will blink while recording is paused.
5 CALL LED
≥The LED will light up when this unit receives
incoming call etc. of the video communication.
(
81)
6 Remote control signal sensor
–Angle: Approx. 20° up and down, 30° left and
right
–Distance: Within approx. 7 m in front of the unit
7 Open/close disc tray (
8 USB port (
24)
9 SD card slot (
24)
: Stop
; Start play
< [BWT800] HDMI (SUB) V.OFF LED (Video off LED)
≥It is possible to set the LED to turn on/off. (
14, 24)
24)
Pull to flip down the
front panel.
= Display
1
2
COPY
HDD
SD
BD
98)
8
1 Disc indicator
2 Copying indicator (
3 USB port indicator
4 SD card slot indicator
5 EXT LINK indicator
6 Timer recording indicator
This indicator lights up when the timer recording
standby is activated.
7 Remote control signal indicator
8 Drive (HDD, BD or SD) indicator
9 Main display section indicator
Current time/playback counter, various
messages
10 Playback indicator
Rear panel terminals (
98)
3
4
5
6 7
USB
SD
EXT -L
PLAY
9
10
55)
10-12, 106, 107)
9
VQT3C13
Advertisement
