Advertisement
5
Press [BACK/RETURN
6
Enter the new PIN.
PIN Entry
Enter a new 4-digit PIN, then press OK.
This PIN will be used for controlling viewing and playback.
PIN will be set to "0000" by pressing "RETURN" when there is no
number input.
-
-
Number
RETURN
≥The default PIN is "0000".
1 Select the number, then press [1] (right).
2 Repeat step 1.
≥Make a note of PIN in case you forget it.
3 Press [OK] twice.
7
Set "Power Save" to "On", "On Timer"
or "Off", then press [OK].
Power Save in Standby
From
0
On
It will go into the Power Save in
Standby mode.
On
Set the start and stop time and then
Timer
press [OK].
≥Power Save in Standby mode is
activated at the set time period.
Off
It is possible to start quickly from the
standby mode. (Quick Start mode)
≥If you use Home Network ( DLNA )
Server function (
"Off". This function is not available
with other settings.
≥Power consumption is lowered additionally
when "RF OUT ( Aerial Signal )" is set to "Off".
(
102)
≥Video from AV2 input cannot be viewed with
this unit in standby mode when Power Save in
Standby mode is activated.
].
-
-
-
0
9
Power Save
On
To
6
101), select
When the following screen appears, Easy Setting
is complete.
Easy Setting
Easy Setting has been completed.
To use Internet functions, network connection needs
to be made first. Proceed Network Easy Setting ?
Select "Yes" to start. Select "No" to exit the Setup.
Yes
OK
≥Select "Yes" to proceed to "Network Easy Setting".
(
16)
≥Select "No" to finish the Easy Setting.
To stop partway
Press [BACK/RETURN
To restart set up
1 While stopped
Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Auto Setup" in "Tuning", then press [OK].
To display the Owner ID information on TV
1 While the unit is on, press and hold [OK], the
yellow button and the blue button on the remote
control at the same time for more than 5 seconds.
–"00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) on the remote control
or [Í/I] on the main unit until "01 OID" is displayed
on the unit's display.
3 Press [OK] on the remote control or [< OPEN/
CLOSE] on the main unit.
The PIN is not displayed.
To edit the Channel List (
To check the signal condition (
Condition)
To change PIN (
102, PIN Entry)
To sort the Channel List by region (
Channel Sorting by Region)
No
].
92, Channel List)
93, Signal
92,
15
VQT3C13
Advertisement
