Table of Contents
Advertisement
GETTING COMFORTABLE
Dual-zone Automatic Climate Control (WRX STI)
You can set separate temperatures for the driver and passenger seats. Set your desired
temperature and let the system automatically make the adjustments for you. At any time,
you can manually take control of the climate settings.
Operation in Automatic Mode
1
Automatic Control Button: This system automatically controls all of the climate
systems except defogging. Press "AUTO" to activate. Press "OFF" to turn off the
system.
2
Temperature Control Dial: Turn the dial clockwise to increase the temperature or
counterclockwise to decrease the temperature. The temperature will appear on the
screen. You can adjust separate temperature settings for the driver's side and
passenger's side.
When using "Full Auto" mode, the fan speed, airflow distribution, air-inlet control and air
conditioning compressor are controlled automatically. To activate "FULL AUTO" mode:
• Press the "AUTO" button. The indicator "FULL AUTO" illuminates on the Multi-Function
Display (MFD).
• Set the preferred temperature using the temperature control dial.
If you operate any of the buttons other than "OFF", rear window defogger, or the
temperature control dial, the "FULL" indicator light will turn off. The "AUTO" light will
remain illuminated. You can then manually control the system as desired. Press the
"AUTO" button to change back to "FULL AUTO" mode.
Operation in Manual Mode
3
Recirculated/Outside Air Button: Press this to prevent outside air from entering
your Subaru. Press the button again to allow outside air into your Subaru.
NOTE: To prevent windshield fogging, do not remain in the recirculated mode for an
extended period of time.
4
Fan Speed Control Dial: Turn the fan speed control dial to increase or decrease fan
speed.
20
Advertisement
Table of Contents
