Advertisement
Read this manual carefully before use, and retain it for future
reference.
Precautions
The lightstrip does not work with a dimmer switch.
It is recommended to use in a well-ventilated area to ensure the
lightstrip's optimal performance.
For indoor use only. Do not use it in high temperatures or high
humidity environments.
The lightstrip is not a toy. Do not allow children to play with it.
Do not place the lightstrip on a hot surface.
Do not bend it for more than 90°.
Do not use aromatic hydrocarbon or chlorofluorocarbon solvents
to wipe the lightstrip.
Do not connect the lightstrip to the supply while it is in the
packing or wound onto a ree.
Do not wind the lightstrip around your body, as this may cause
cause entanglement or suffocation.
Do not connect the lightstrip to power before it is fully installed.
Do not use the lightstrip when covered or recessed into a
surface.
The light source in this lightstrip cannot be replaced.
When they reach the end of their service life, the entire lightstrip
needs to be replaced.
The lightstrip extention can only be used with the Xiaomi Smart
Lightstrip Pro. Do not connect it to any other lightstrip. Clean the
surface to ensure it is clean and dry before installing the clips.
Once affixing the clips to the surface, apply some pressure to
make sure they stay stuck.
After attaching the clips, it is recommended to wait for
20 minutes before installing the lightstrip.
1
Advertisement
