Advertisement
1-
for about 5 seconds to stop the process.
2-
your thermostat's user manual and let
your receiver is fully connected.
manual.
out releasing it:
the receiver erases the radio as-
MANUAL TEST OF THE RECEIVER OUTPUT
You can manually test the receiver and tempo-
will be turned on.
This manual command will be canceled at the next order received by the receiver.
TROUBLESHOOTING
IN CASE OF POWER FAILURE
DIAGNOSIS SUPPORT
circuit breaker or the fuse in the power
supply circuit.
tween the thermostat and the receiver
from working properly.
- Contact your installer.
- Contact your installer.
mission
www.neomitis.com
3-
receiver is connected to the intelligent
thermostat.
-
.
- Check the level of radio transmission
sure that the radio transmission has not
closer to the receiver.
-
-
by an external heat source.
procedure
.
-
.
NEOMITIS
®
- Move the thermostat out of the dis-
turbed area.
TECHNICAL SPECIFICATIONS
Hz.
230V.
- Power in standby mode: <0.5W.
P44 wall mounted and
- Rated impulse voltage: 4000V.
62.5KHz.
- Radio power: <15dbm.
- Receiver category: 3.
(please
The symbol
indicates that you must dispose of it at the
end of its useful life at a special recycling
-
Recycling products enables us to protect the environment and to use less natural re-
sources.
PRODUCT CODE
code and reference:
ER1C1
-
-
(see
-
Dimensions:
.
are part of Axenco Group.
-
Myneo stat 1 channel radio receiver for connected
thermostat
.
-
-
4
Advertisement
