Advertisement
3-
device.
5-
1- Put the cables to be connected in the
area provided for this purpose
3-
receiver on the recessed box.
Under the housing
On the back of the case
4- Put the sealing cap in the dedicated
area.
6-
mount the receiver on the recessed
box.
2-
(see
.
-
On the side of the housing
with the cable guide (not
controlled
1-
the wall base to the wall.
3- Secure the wall base with the two
screws and plugs provided.
4-
pass through the cable of the device
to be connected.
6-
Note:
1- Replace the product
cover.
OPERATING
RF PAIRING BETWEEN THE THERMOSTAT AND THE
RECEIVER
The receiver and the thermostat are not linked at the factory. For the transmission to
manual of the thermostat to be linked with you to carry out the learning stage. This
This wall-mounted receiver has been specially designed to be connected directly to your
smart thermostat.
2-
back of the wall base.
4-
mount the receiver on the recessed
box.
5- Put the sealing cap in the dedicated
area.
7-
mount the receiver on the recessed
box.
2- Lock the cover
the screw
below.
3
Advertisement
