INDEX 1. Parts and components 2. Before use 3. Operation 4. Cleaning and maintenance 5. Technical specifications 6. Disposal of old electrical appliances 7. Technical support and warranty...
Page 3
SAFETY INSTRUCTIONS Read this instruction manual carefully before use, even if you are familiar with the operation of this type of product. - The safety instructions contained herein reduce the risk of fire, electric shock, and injury, as long as they are properly followed.
Page 4
- Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger. - Do not use the appliance if its cord, plug, or housing is damaged, nor after it malfunctions or has been dropped or damaged in any way.
Page 5
It could result in fire or electric shock. - Do not use any accessory that has not been recommended by Cecotec, as they might cause injuries or damage. - Keep this appliance and its power cord out of reach of children under the age of 8.
Page 6
STOP/START immediately and unplug it from the mains supply. Do not try to repair the product by yourself. Contact the official Technical Support Service of Cecotec. - To ensure the correct operating of the device, cleaning and maintenance tasks must be carried out according to this instruction manual.
Page 7
If the problem remains, stop using the appliance and contact the Technical Support Service of Cecotec. - Do not attempt to remove food from the inside of the toaster while it is plugged to the mains supply. Unplug it and let it cool down before removing foodstuffs from its interior.
Do not use the product if it or its cord have been damaged or are not working properly. In case of damage, contact the official Technical Support Service of Cecotec for advice, repairs or returns. Make sure you have read and understood all instructions and warnings in this instruction manual.
ENGLISH Note You may notice a slight burning smell or smoke when using the toaster for the first time, caused by the excess of lubricants from the manufacturing process. Ensure good ventilation and let the toaster complete a few cycles until no odour or smoke can be noticed. After a short cooling down period, your toaster will be ready for use.
ENGLISH 4. CLEANING AND MAINTENANCE Unplug the toaster from the mains supply and allow it to cool down completely before disassembling, cleaning, or storing it. Do not immerse the toaster, cord, or plug in water or any other liquid. Do not clean the inside of the toaster, as it may damage the heating elements. Do not use a metal scouring pad, abrasive materials, metal polish, harsh chemical cleaner, or hard objects to clean any surface of the toaster.
In the event of misuse, the warranty will not apply. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728. TOAST&TASTE 2S...
Need help?
Do you have a question about the TOAST&TASTE 2S and is the answer not in the manual?
Questions and answers