Maintenance; Cleaning The Dustbin; Cleaning The Filter - Samsung VS15T70 Series User Manual

MAINTENANCE

Maintenance
❇ ❇ For detailed information, please
refer to the QR code.
CAUTION
• Turn off the vacuum cleaner before cleaning
it.
• If the dustbin or filter is filled with dust,
the vacuum cleaner may stop to prevent
overheating.
• You should clean the dustbin or filter before
it fills to the MAX line.

Cleaning the dustbin

#18 Dustbin / Metal mesh grille filter
Brush the dust off the metal mesh grille filter
with the combination tool.
❇ ❇ Do not pull the rubber attached to the
metal mesh grille filter.
After emptying the dustbin, clean it and dry
in the shade.
❇ ❇ When heat is applied, product malformation
may occur.

Cleaning the filter

• To maintain the best performance of
the filter, remove the dust on the filter
frequently and clean the filter with water
once a month.
– After cleaning, dry completely for more
than 24 hours in the shade before use.
– When heat is applied, product
malformation may occur.
#19 Washable micro filter
#20 Fine dust filter
CAUTION
• When assembling, turn the filter until the
line below the lock image is not visible.
14 English
Cleaning the accessories
#21 Mini Motorized Tool
#22 Extension Crevice Tool / Pipe
#23 Soft Action Brush
NOTE
• When foreign matter remains on the brush,
remove it with a wet tissue or a dry cloth.
CAUTION
• Do not clean the spinning brush and suction
part with water.
• Do not use the Soft Action Brush to remove
moisture such as spilt liquid or pet's waste.
#24 Turbo Action Brush
• If the foreign matter is not removed, use
scissors to remove it.
NOTE
• If a cloth or other foreign matter is
vacuumed up and tangled with the spinning
brush, the spinning brush will stop working
to protect the brush motor. After cleaning
the brush, turn the power off and then on
again.
• If a brush does not work after cleaning, turn
the power off and then on again.
• When cleaning the brush, be careful not to
catch your fingers in the fold of the brush.
#25 Wet Brush
NOTE
• If the spinning brush does not work even
after cleaning the Soft Action Brush and Wet
Brush, the overheating prevention device of
the brush motor might be in operation. Wait
30 minutes or more to cool the motor and
operate again.