Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sovereign M1Q-DD7-55BD
Summary of Contents for Sovereign M1Q-DD7-55BD
- Page 1 450W JIGSAW Item No. 594446 Model No. M1Q-DD7-55BD Technical Support & Parts 01904 727509 Mon-Fri 9am-5pm Sat-Sun 11am-4pm www.coreservice.co.uk ORIGINAL INSTRUCTION MANUAL Please read these instructions fully before starting assembly. HHGL Limited, MK9 1BA; HHGL (ROI) Limited, D02 X576 Mar 21...
-
Page 2: Table Of Contents
CONTENTS Contents General safety warnings Warning symbols In the box Operation Maintenance and storage Technical data Recycling and disposal UK plug Getting help Warranty... -
Page 3: General Safety Warnings
GENERAL SAFETY INFORMATION WARNING! Read all safety warnings, provided with this power tool. Failure to follow all instructions listed below injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. - Page 4 tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c.
- Page 5 or medication. A moment of inattention while operating power tools may result in serious personal injury. b. Use personal protective equipment. Always wear eye protection. Protective equipment, such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Page 6 h. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. 4) Power tool use and care a.
- Page 7 power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits, etc., in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Page 8 ADDITIONAL SAFETY WARNINGS FOR JIGSAWS a. Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live “wire may make exposed metal parts of the power tool “live”...
- Page 9 g. Use only undamaged saw blades that are in perfect condition. Bent or dull saw blades can break, negatively influence the cut, or lead to kickback. h. Do not brake the saw blade to a stop by applying side pressure after switching off. The saw blade can be damaged, break or cause kickback.
-
Page 10: Warning Symbols
WARNING SYMBOLS Warning! Read the instructions Wear ear protection Wear eye protection Wear a dust mask Class II tool The product complies with the applicable European directives, and an evaluation method of conformity for these directives was done. Recycle unwanted materials instead of disposing of them as household waste. -
Page 11: In The Box
IN THE BOX Description Accessories... -
Page 12: Operation
OPERATION NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for sawing wood, plastic, metal and building materials while resting firmly on the workpiece. It is suitable for straight and curved cuts with bevel angles to 45°. The saw blade recommendations are to be observed. - Page 13 4. BLADE FITTING (SEE FIG. D) NOTE: Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. To fit the blade, firstly raise the finger protection and use the Allen key provided to loosen the blade set screws on the blade holder.
- Page 14 6. BASE PLATE ANGLE ADJUSTMENT Adjusting the angle of the base plate enables bevel cutting. The base plate must always be held firmly against the materials being cut to reduce saw vibration, blade jumping or blade breakage. Use an Allen key (4). Loosen the bolts securing the base plate (SEE FIG.
- Page 15 7. DUST TUBE (SEE FIG. I) Mount the dust tube (5) into the opening of the base plate (6). Make sure that the plastic tip of the vacuum connection engages into the corresponding opening on the housing (as shown in the figure I). 8.
-
Page 16: Maintenance And Storage
MAINTENANCE AND STORAGE IMPORTANT: Make sure that the tool has been thoroughly cleaned before storing it in a clean, dry and safe place, out of the reach of children. 1. Switch the product 'OFF' and disconnect it from the power supply before transporting it anywhere. -
Page 17: Technical Data
TECHNICAL DATA Model M1Q-DD7-55BD No-load speed Max. cutting depth 55mm wood, 6mm metal Protection class Weight 1.7kg Noise and vibration data A weighted sound pressure (L ) 90 dB(A), k=3dB(A) A weighted sound power (L 101 dB(A), k=3dB(A) Vibrations The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary. - Page 18 And the tool is being used as intended by its design and these instructions. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. WARNING! To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle, such as the times when the tool is switched off...
-
Page 19: Recycling And Disposal
RECYCLING AND DISPOSAL Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advices. UK PLUG instructions below. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue–Neutral, Brown–Live WARNING! Never connect live or neutral wires to the BS1363/A plug and the correct rated fuse. -
Page 20: Getting Help
GETTING HELP Our dedicated UK-based customer helpline is open 7 days a week to assist you with assembly, parts queries and technical send an email via support@coreservice.co.uk. Our experts are here to get you back enjoying your garden in no time. For useful assembly, starting and maintenance videos, and ordering spares, please visit www.coreservice.co.uk.
Need help?
Do you have a question about the M1Q-DD7-55BD and is the answer not in the manual?
Questions and answers