Advertisement
Installation
1. Remove clamp, shock assembly and set screws.
Plug threads with set screws (13). Remove gas
shock while in the fully extended, uncompressed
position (i.e. gun arm in upright, stowed position).
2. Mount steerable carriage assembly to traverse
bracket using screws (5) and thread locker (18).
3A5407B
3. Mount control (14) in desired location, or to control
arm of seat kit 25M716.
4. Connect wire harness from control (14) to the
plug-in at the junction box and to the motor (3).
Installation
3
Advertisement
